#Configurar ivms 4200 how to#
#Configurar ivms 4200 update#
#Configurar ivms 4200 full#
#Configurar ivms 4200 free#

Now, the NVRвЂ™s time is set properly but you need to make sure itвЂ™s actually visible on both the live stream and the recordings the camera takes.

The device should either immediately refresh its time, or will refresh itself at the next interval which you just set. Fill in the required fields with the details youвЂ™ll be using and hit save. In this guide we will use us. we are located in North America.ДЄccess your NVR via a web browser and navigate to Configuration > System > System Settings > Time Settings tab.

#Configurar ivms 4200 full#

You can find a full list of countries on their website. We recommend using as they provide a large number of reliable connected servers from multiple countries to synchronicity with (world wide ). To have the right timestamp, you need to find the address of a reputable NTP server. Configure the time settings for a Hikvision NVR (or DVR) In order to avoid an incorrect timestamp, Hikvision devices use NTP (Network Time Protocol) as well as DST (Daylight Saving Time) to adjust the deviceвЂ™s time. ItвЂ™s crucial to have your time settings configured and synchronized as accurately as possible with the actual time and any other devices, such as other cameras, NVRs, DVRs. A correct allows you to pinpoint exactly when an event occurred, as well as corroborate this with anything else that might have happened nearby. Imagine the cameras having the wrong date or time, itвЂ™d be a nightmare. If something happens, youвЂ™ll need the exact and correct time of the incident. Having a correct timestamp on your cameraвЂ™s recordings is very important for your CCTV security system. All you have to do is use the no-ip domain name to access your security system.Sometimes the Hikvision NVR (or camera) date and time may be incorrect.

#Configurar ivms 4200 update#

Now on, no matter if the external (public) IP address of your home network changes, the NO-IP will update it by itself. You can login with your Hikvision username and password. If the settings are correct, you will be redirected to the NVRвЂ™s login interface, the URL will start with your Public IP address.

Make sure the DDNS Status shows as вЂњnormalвЂќ or вЂњonlineвЂќ. Note: Check the DNS status before configuring the DDNS, Preferred DNS is recommended to be 8.8.8.8 and Alternate DNS 8.8.4.4. You can always manage the domain name later in the NO-IP control panel.

Enter the domain name you created during registration.

The click Network > Basic Settings > click on DDNS.Д¬onfigure the DDNS settings as shown in the picture below. Go back to the NVR вЂs web interface and navigate to configuration. For example you can create or any other DDNS that the prompts offer you. During the account registration, you will be asked to create a hostname.

Usually itвЂ™s for free, but needs to be manually updated every 30 days. Go to No-IP website and register an account. If youвЂ™re not sure where to locate it, simply google вЂњport forwarding and your routerвЂ™s modelвЂќ. Note: Another way to open the ports is by going to the Port Forwarding section of your router and opening them manually. Click on Apply, wait for the router to finish configuration Enter the IP address of your NVR system that needs to be mapped. In this case, we will open the ports by enabling the DMZ option. Note: Most of the Hikvision NVRs uses following 3 ports (which can be modified as well): Router configuration differs from router to router, in this demonstration we will use RT-AC1900 from Asus. Configure the port forwarding or DMZ settings on the router, mapping the port for the NVR or put the NVR IP address in the DMZ zone. However, the logic is the same across all the platforms. The procedure below is done via the web interface. There are a few ways how you can do the settings: directly from the NVRвЂ™s local interface, through the web interface or even via the iVMS-4200 software.

#Configurar ivms 4200 how to#

Note: For more details about DDNS and how it works in CCTV security systems, take a look at this article: How to set the DDNS DynDNS on the Hikvision NVRs/DVRs/Camera. If you think itвЂ™s good, you can purchase an account.

#Configurar ivms 4200 free#

No-IP basic service is provided free of charge, yet you will have to confirm the hostname every 30 days. In other words, instead of using a private IP address (such as .x) or public IP address, you can use URL and domain name. This provides the possibility for remote access anywhere in the world as long as thereвЂ™s Internet connection. Once the DDNS is configured on the Hikvision NVR, you will be able to access the NVR (or DVR) directly from the Internet instead of from Local Area Network only. This guide will demonstrate how to configure No-IP DDNS on Hikvision NVR. Hikvision NVR or DVRs support multiple popular DDNS such as DynDNS and No-IP and some OEM versions allow custom DDNS as well.